Compare with the solid rod anode, tube anodes can:

1. Minimize the resistance of anodes to electrolytes.

2. Increase the surface to weight ratio, thus can reduce current density and distribute the produced gases over larger areas. It is very important for deep layer installations.

3. Improve current distribution, relaxes end electric discharge, while the cable joint is located in the center of the tube.

General Specification

Type	Out Diameter	Wall thickness	Surface area	Length
KTS-T01	75 mm	10 mm	0.35 m2	1500mm
KTS-T01	100 mm	10 mm	0.47 m2	1500mm
Anode sizes shown in bold are standard sizes.  Other shapes and sizes of anode available.

In sea water or fresh water, we suggest using Si-Fe alloy containing of chromium or chromium molybdenum to resist the corrosion of chlorines.